A car lift, also called a car lift, is a forklift that specializes in the vertical movement of vehicles. They are used to transport these vehicles from one height to another with or without an occupant. For this purpose, its design is generally robust and simple, so that it can withstand the blows well and facilitate the entry and exit of vehicles. Its technology can be more or less elaborated in its presentation and in the handling devices, but in general it uses the same basic physical principles.
How do they work?
The most efficient and most widespread car lifts are the hydraulic ones that work by the Pascal principle. This one that affirms that, when exerting pressure on a liquid body, it is transmitted to the entire container of the liquid without diminishing its volume. In a container that has non-deformable retaining walls, these will direct all this pressure towards the only point that is free to release it. In the case of a hydraulic lift, an actuator piston is available, that is, the place where the inlet pressure is exerted, which is of a smaller size compared to the executing piston. The pressure is lower at the point of action, although the distance traveled during it increases with respect to that obtained in the executing piston. In this way, a high pressure can be generated to lift a very heavy element by exerting a small pressure for a long stroke.
What parts does a car lift have?
A car lift has mechanical parts and, in many cases, electronic parts and additional safety mechanisms. The first operate as described in the previous section and are responsible for moving the vehicle. A hydraulic jack, for example, would have only this type of components. For electronic parts there is a wide variety, which ranges from basic switchboards to computers for elevator management. With them it is intended that there is comfort and reliability at the time of handling.
The most modern elevators have controllers that incorporate all the electric part of the elevator with the technology "plug and play" to reduce times and installation errors. In addition, many elevators have integrated valves in the circuit that allow better regulation of pressure and improve the overall safety of the system for operators as well as for the vehicle and the device. On the other hand, among the electronic components can be found security systems that ensure that the elevator is working correctly or that they are blocked in case there may be some risk.
What types of auto lifts exist?
Depending on the type of work to be done, there are several types of car hires. The two-post lift is often used to lift light or medium-sized cars. The four-post lift is more versatile and has the possibility of lifting heavier loads. The parking lifts allow you to stack vehicles that will not have to move for extended periods of time or in a way that makes the parking space more efficient.
For other needs, such as wheel alignment services, there are elevators specially designed for this. You can also find mobile elevators, more powerful than a simple hydraulic jack but not necessarily installed on the ground in a fixed manner. In addition to these elevators, there are a large number of designs for special jobs: scissor lifts, low-rise elevators, mobile column elevators, elevators designed for small workshops and a long catalog. Astarlifts has a long history in the manufacture, installation and maintenance of all these equipment although it stands out for its extensive experience in larger elevators.
What kind of auto lifts does Astarlifts offer?
The vehicle lifts, as mentioned before, can be of different kinds. In the case of those who trade Astarlifts, they can be divided into two large families: forklifts with cabins and forklifts without cabins.
The first are faster, can carry heavier loads, travel greater distances and obviously incorporate a cabin with automatic doors. As a counterpart, they require a minimum pit or leak. Forklifts without cab have their limited travel to 12 meters, can carry half the weight of a forklift with cabin (up to 2.5 tons) and are up to five times slower than those with cab. However, their installation is less invasive, as they do not require a pit for installation. Both types can be found in Astarlifts.
Who can benefit from a car?
There are many companies that can benefit from a car, from dealers to those responsible for spare parts and repairs. In a dealer, the end of the elevator can be strictly advertising, to show the technology available to the vehicle. It can also serve to store more vehicles so that the available space is multiplied or can be used for mechanical services.
For this purpose, two-post car or scissor lifts are usually found in mechanic-automotive service shops. Currently, it is impossible to imagine a workshop that does not have the capacity to move vehicles so that they are easily accessible from the bottom. In this way, parts that may have been damaged or that require maintenance or repair can be clearly observed. In many countries, tuning workshops have become one of the most profitable companies. These places must have elevators designed to be able to align the wheels and calibrate the different balances of the vehicle.
They can also be found in public car parks with a certain technological capacity. A car elevator that stacks vehicles can triple or quadruple the capacity of a parking lot, making space a much more profitable asset.
A car lift at home
The advantages that companies obtain when using these transporters can be equally applicable in the personal field. For example, the utility of stacking vehicles for public parking is reflected in residential garages. By increasing the number of vehicles per family, but not the space available, vehicles are often left parked outside, where they are likely to be stolen or hit. Some residential blocks increase with the elevators the number of places available for their residents. But they can also be used in single-family homes, so that a place is available to have the vehicle safeguarded without having to access it by ramp. In homes with little room for maneuver or for cars with a particularly high cost, a car lift can be a great solution for storing a vehicle.
Is it profitable to buy a car lift?
As previously mentioned, a good design of the car lift includes a simple structure and easy maintenance. This means that, with proper management and essential care carried out routinely, the life of a car lift can go on for a long time. Its operation with low average speeds and its easy handling means that it is not damaged by the weight of large tonnages. This makes them a long-term investment, since its price, although it is above the rent of an additional garage, in the long term becomes profitable.
If the use that is given is for labor issues, there are many jobs that could not be carried out if these tools were not available. In these cases, a car lift is an indispensable piece to obtain economic performance of a business.